Mangrove forest decline: consequences for livelihoods and environment in South Sulawesi

Mangrove forests in the tropics and subtropics grow in saline sediments in coastal and estuarine environments. Preservation of mangrove forests is important for many reasons, including the prevention of coastal erosion and seawater intrusion; the provision of spawning, nursery, and feeding grounds of diverse marine biota; and for direct use (such as firewood, charcoal, and construction material)—all of which benefit the sustainability of local communities. However, for many mangrove areas of the world, unsustainable resource utilization and the profit orientation of communities have often led to rapid and severe mangrove loss with serious consequences. The mangrove forests of the Takalar District, South Sulawesi, are studied here as a case area that has suffered from degradation and declining spatial extent during recent decades. On the basis of a post-classification comparison of change detection from satellite imagery and a survey of households, we provide an estimate of the mangrove change in the Takalar District during 1979–2011 and the consequences of those changes. Mangrove forest areas were reduced by 66.05 % (3344 hectares) during the 33-year period of analysis, and the biggest annual negative change in dense mangrove forest cover (8.37 %) occurred during the period 2006–2011. The changes were caused mainly by the mangrove clearing and conversion to aquaculture, and consequences have been increasing forest degradation, coastal abrasion, seawater intrusion, a decline in fish capture, a reduction in juvenile shrimp and milkfish, and outbreaks of shrimp disease. On the other hand, the clearing and impoundment of mangrove forests for shrimp and seaweed culture have provided a source of foreign exchange and new opportunities for employment in the study area.     

Effect of pH and alum dosage on the efficiency of microalgae harvesting via flocculation technique

Microalgae biomass is well known as a potential sustainable product for bio-based industry, which has reported encountering numerous difficulties during biomass harvesting and recovering. This study examined the effect of pH (5–12) and alum dosage (30–180 mg/L) for microalgae Botryococcus sp. harvested via flocculation technique. The optimum pH condition for Botryococcus sp. harvesting was measured to be 9.2, and the alum dosage was 100 mg/L. Both optimum values successfully harvested up to 95% microalgae biomass. This study revealed that flocculation efficiencies for alum are highly dependent on the range of pH and coagulant dosage that were applied during the process. Use of flocculation technique with alum as a coagulant represents a convenient technique for Botryococcus sp. biomass harvesting and is recommended for use in both small- and large-scale biomass industries.     

Kinetic of formation for single carbon dioxide and mixed carbon dioxide and tetrahydrofuran hydrates in water and sodium chloride aqueous solution

A laboratory-scale reactor system is built and operated to measure the kinetic of formation for single and mixed carbon dioxide–tetrahydrofuran hydrates. The T-cycle method, which is used to collect the kinetic data, is briefly discussed. For single carbon dioxide hydrate, the induction time decreases with the increase of the initial carbon dioxide pressure up to 2.96 MPa. Beyond this pressure, the induction time is becoming relatively constant with the increase of initial carbon dioxide pressure indicating that the liquid phase is completely supersaturated with carbon dioxide. Experimental results show that the inclusion of tetrahydrofuran reduces the induction time required for hydrate formation. These observations indicate hydrate nucleation process and onset growth are more readily to occur in the presence of tetrahydrofuran. In contrast, the presence of sodium chloride prolongs the induction time due to clustering of water molecules with the ions and the salting-out effects. It is also shown that the degree of subcooling required for hydrate formation is affected by the presence of tetrahydrofuran and sodium chloride in the hydrate forming system. The presence of tetrahydrofuran in the hydrate system significantly reduces the amount of carbon dioxide uptake. The apparent rate constant, k, for those systems are reported.     

Cost efficiency analysis and emission reduction by implementation of energy efficiency standards for electric motors

The industrial sector is the biggest electricity consumer in Malaysia. Electric motors account for more than 45% of the electricity consumption in the industrial sector in the country. Therefore, it is very important to implement energy efficiency standards for electric motors to reduce energy consumption growth in this sector. This paper attempts to calculate the cost efficiency analysis and emission reduction by implementing energy efficiency standards for electric motor in Malaysia. The energy efficiency standards are proposed based on the efficiency of electric motors from survey data. The study examines the potential energy, economical and environmental impacts of the implementation of energy efficiency standards for electric motors in three scenarios i.e. 0.5%, 1.0% and 1.5% of standards efficiency improvement. Standards also enable consumers to reduce their electricity bill and contribute to a positive environmental impact.     

Cytotoxicity,genotoxicity and oxidative stress of malachite green on the kidney and gill cell lines of freshwater air breathing fish Channa striata

The cytotoxicity, genotoxicity and oxidative stress of malachite green (MG) was investigated using the fish Channa striata kidney (CSK) and Channa striata gill (CSG) cell lines. Five concentrations ranging from 0.001 to 10 μg mL^?1 were tested in three independent experiments. Cytotoxicity was assessed by 3-(4, 5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay, Rhodamine 123 and Alamar Blue. The mitochondrial changes and apoptosis of MG-exposed cells were observed by Rhodamine 123 and acridine orange/ethidium bromide (AO/EB) staining, respectively. In vitro potential DNA damaging effect of MG was tested using comet assay. Mitochondrial damage, apoptosis and DNA fragmentation increased in a concentration-dependent manner. Additionally, DNA electrophoretic mobility experiments were carried out to study the binding effect of MG to double-stranded DNA (dsDNA) of cells. DNA shift mobility experiments showed that MG is capable of strongly binding to linear dsDNA causing its degradation. Biochemical parameters such as lipid peroxidation (MDA), catalase (CAT) activity and reduced glutathione (GSH) levels were evaluated after exposure to MG. In CSK and CSG cell lines exposed to MG for 48 h, a significant increase in lipid peroxidation, which might be associated with decreased levels of reduced glutathione and catalase activity in these cell lines (p?相似文献   

House dust as a source of human exposure to polybrominated diphenyl ethers in Kuwait

This study reports concentrations of polybrominated diphenyl ethers (PBDEs) in dust samples collected from 17 homes in Kuwait. PBDEs were measured in all homes investigated with mean summation operatorPBDEs concentration ranging from 1 to 393 ng g(-1), with a geometric mean of 76 ng g(-1). The dominant congener in all samples was BDE 209 constituting ca. 85% of the summationPBDEs followed by BDE 99 (5%), BDE 47 (4.5%), and BDE 183 (2%). The congener mixture in dust is dominated by those in deca and penta formulations. Using the measured concentrations and estimates of dust ingestion rates for children and adults, estimated human non-dietary exposure based on mean PBDE levels were 14.8 and 1.5 ng day(-1) for children and adults, respectively. The 10-fold difference in exposure estimates between children and adults in this study supports previous reports that children are at greater risk from pollutants that accumulate indoors. The ubiquitous distribution of these chemicals as noted in this study highlights the fact that we are continuously exposed to low doses of chemicals in the indoor environment.     

Tensile,Flexural and Chemical Resistance Properties of Sisal Fibre Reinforced Polymer Composites: Effect of Fibre Surface Treatment

In this study, effect of fibre surface treatment on tensile, flexural and chemical resistance properties were studied for sisal fibre reinforced composites. Natural ligno cellulosic sisal fibre reinforced composites were prepared by different surface treatments by hand lay-up method. Fibre surface treatments were carried out to produce good interface between the fibre and the matrix to improve the mechanical properties. Fibre surface treatments were done by boiled the sisal fibres in different % of NaOH and treated the fibres in different % of NaOH, treated in acetic acid and methanol. Unsaturated polyester resin was used as the matrix for preparing the composites. For comparison, these properties for untreated sisal fibre reinforced composites were also studied. From the results it was observed that 18% aqueous NaOH boiled sisal fibre reinforced composites have higher tensile, flexural properties than other composites. Untreated sisal fibre composites show lower properties than treated composites. Chemical resistance properties indicate that all sisal fibre reinforced composites are resistance to all chemicals except carbon tetra chloride. The tests are carried out as per the ASTM standards.     

Effect of liming on the distribution of heavy metals in untreated industrial sewage sludge produced in Pakistan for the cultivation of <Emphasis Type="Italic">Sorghum bicolor</Emphasis> (L.)

The recycling of sewage sludge on agriculture land represents an alternative, advantageous, disposal of this waste material. The aim of the present study was to evaluate the feasibility of using industrial sewage sludge, produced in Pakistan, as a fertiliser. Agricultural soil amended with 25% (w/w) sewage sludge with or without lime treatment was used for growing a variety of sorghum (PARC-SS-1). The mobility of the heavy metals (HMs) (Cd, Cu, Cr, Ni, Pb and Zn) and metalloid (As) in the untreated industrial waste water sewage sludge (UIWS) samples were assessed by applying a modified BCR (Community Bureau of Reference) sequential extraction procedure. The single extraction procedure comprised of the application of mild extractant (CaCl₂) and water for the estimation of the proportion of easily soluble metal fractions. The precision and accuracy of BCR was evaluated by using a certified reference material of soil amended with sewage sludge BCR 483. The plant available metal contents, as extracted by the deionised water and 0.01 M CaCl₂ solution and exchangeable fraction of BCR sequential, decreased with lime application in the range of 10–44% for As, Cr, Ni, Pb and Zn, except in the cases of Cd and Cu, where their mobility was increased by 10% and 24%, respectively. Sludge amendment enhanced the dry weight yield of sorghum and the increase was more obvious after liming up to 25%. The uptake of HMs were lower in test samples (3.2–21.8%), except for Cu and Cd, which was higher (4%), while they were below the permissible limit of these metals. The present experiment demonstrates that liming was important in factors facilitating the growth of sorghum in sludge-amended soil.     

Impact of anthropogenic activities on physico-chemical parameters of water and mineral uptake in Catla catla from river Ravi, Pakistan

The river Ravi, while passing through Lahore, the second largest city of Pakistan, gets highly polluted owning heavy loads of untreated municipal sewage and industrial effluents of diverse kinds. The fish, Catla catla sampled in two different seasons from three downstream polluted sites were compared with the samples of the same fish from an upstream, a less polluted site, for their physico-chemical parameters. The data were statistically analysed to study the effect of sites, seasons and their interaction on the physico-chemical parameters of waters and mineral uptake in fish muscles. Significant differences (P?<?0.001) among the sampling sites and seasons were observed. The river appeared to be polluted as indicated by the high values of total suspended solids (909 mg/l) and sulphate (964 mg/l) in comparison to the respective values of 150 and 600 mg/l being suggested as the safer values of drinking water of the National Environmental Quality Standards. Most trace and macro elements in fish muscles were increased with the increasing pollution loads from the upstream to the downstream sites of this river. The remarkable increases in the levels of all the investigated minerals in fish muscles from the polluted sites raise concerns about the long-term health of the river Ravi ecosystem and consequently the fish and its consumer’s health. The results contradict the opinion of the local population that the riverine fish are natural, more health-promoting and precious than the pond fish. Therefore, we strongly argue for the utilization of an effect-based monitoring approach to alleviate the detrimental effects of anthropogenic activities on fish and the fish consumers’ health.